Have you ever had a new AC unit installed, only to find it’s not working as expected? It’s a frustrating situation, but fortunately, there are solutions to get things running smoothly.
Whether it is Beltway Air Conditioning & Heating AC Installation or any other service, basic knowledge of troubleshooting can save one from tangles of time and discomfort. Check simple settings and analyze more complicated problems.
This guide will help you with knowledge that not only gets you cool back in your tracks but does so without breaking a single sweat.
Inspect Power Supply
For any newly installed AC unit, the first steps in troubleshooting would be to inspect its power supply and make sure it has the electrical support to operate efficiently and safely.
Confirm Electrical Connections
- Check the wiring connections. Loose or disconnected wires can cause issues. Make sure each wire is securely connected.
- Make sure all terminal screws are tight. This prevents power loss.
- Inspect for wear or damage in the wiring. Damaged wires need immediate replacement.
Examine Circuit Breakers
Head to your electrical panel and check if the breaker connected to your AC has tripped. If it has, flip the switch back on and see if that restores power to the unit. If the breaker trips again, there may be a deeper electrical issue that requires professional help.
If troubleshooting your newly installed AC unit becomes overwhelming, it might be time to consult a professional. Expert HVAC contractors can provide valuable insights and solutions to complex issues that may not be immediately apparent. For those in the Longview area, finding a reliable service provider is crucial. Consider reaching out to a trusted local expert through this link to ensure your AC unit operates efficiently and effectively.
Ensure the Power Switch On
- Check the indoor unit’s power switch. It should be in the “on” position.
- Then, examine the outdoor unit’s disconnect switch. Make sure it’s properly engaged.
- Confirm no safety switches are off. These can cut power unexpectedly.
Verify Thermostat Settings
Once you’ve confirmed that the AC is receiving power, you can then verify the thermostat settings to make sure it’s set to the correct mode and temperature.
Set your thermostat lower than the room’s temperature to start your AC. Keep your thermostat away from direct sunlight or heat to maintain accurate readings. Always set it to “cool” and check if the display shows it’s working. If it was on “heat” or “off,” switch it to “cool.” This easy fix can solve common problems with a new AC unit not cooling properly.
Weak batteries can cause thermostat issues. Replace them with fresh ones recommended by the manufacturer for optimal performance. After swapping, check the display to ensure it’s working properly.
Examine Air Filters
Air filters are important for maintaining good airflow and keeping your AC running efficiently. If the air filters are dirty or clogged, they can block airflow, making the system work harder or even preventing it from cooling properly.
Locate your air filter (typically near the return air duct or inside the air handler) and inspect it. If it looks dusty or clogged, it’s time to clean or replace it. Depending on the type of filter, you may need to clean it with water or replace it entirely. Regular maintenance of air filters can improve your AC’s efficiency and extend its lifespan.
Look for Refrigerant Leaks
Refrigerant is the substance that cools the air in your AC unit. If there is a refrigerant leak, your system won’t be able to cool the air effectively. While refrigerant issues are more difficult to spot on your own, you can look for some signs that indicate a possible leak.
Common signs include ice forming on the refrigerant lines or the outdoor unit, warm air blowing from the vents, or a noticeable decrease in cooling efficiency. If you suspect a refrigerant leak, it’s important to call a professional technician. Handling refrigerant requires specialized tools and knowledge, and it’s illegal to handle it without proper certification.
Contact Installer Support
Check your AC’s warranty to know what’s covered, like parts and labor, and for how long. Be aware of any conditions that could void it. Then, get a professional HVAC technician to inspect your system, focusing on refrigerant and electrical components.
Mention any odd noises or cooling issues, as they can find problems we might overlook. If you’re worried about how well it was installed, talk to the installer to make sure it meets the manufacturer’s standards. Don’t hesitate to ask questions or raise concerns now; they should address and resolve any issues.
Resolve AC Issues Quickly: Follow These Simple Troubleshooting Steps!
Troubleshooting your newly installed AC does not have to be a headache. You have it-checking thermostat settings, making sure the power supply is continuous, keeping air filters clean, and looking out for possible refrigerant leaks.
If those steps don’t clear up your issues, then reaching out to installer support is your best bet. It’s one of those things that can nip any potential problems in the bud before they snowball out of control. With these troubleshooting tips, you’re better equipped to keep your AC running smoothly.

Expert in glasses with 8 years of experience, Isabella Lane dives into the world of eyewear. Explore their insightful content on the latest trends, lens technology and styling tips for a clearer vision.